SWITCH 16P LAN GIGABIT UBIQUITI USW-Pro-Max-16-PoE L3 4P PoE++ 2.5GbE 12P GbE PoE+ 2P SFP+ 10G staffe rack non incl. (180W)

Mechanical
Dimensions: 325.1 x 160 x 43.7 mm
Weight: 2.1 kg
Enclosure material: SGCC steel

Hardware
Management interface: Ethernet In-Band
Networking interface: 
- 12x GbE RJ45 ports
- 4x 1/2.5 GbE RJ45 ports
- 2x 10G SFP+ ports
PoE interface: 
- 12x PoE/PoE+ (Pins 1, 2+; 3, 6-)
- 4x 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput: 42 Gbps
Switching capacity: 84 Gbps
Forwarding rate: 62.496 Mpps
Power method: DC adapter
Power supply: 54V, 210W
Max. power consumption: 30W (Excluding PoE output)
Total available PoE: 180W
Max. PoE wattage per port by PSE: 
- PoE: 15.4W
- PoE+: 30W
- PoE++: 60W
Voltage range PoE mode: 
- PoE: 44—57V
- PoE+/PoE++: 50—57V
LCM display: (1) 1.3'' touchscreen
Button: Factory reset
Ambient operating temperature: -5 to 40° C (23 to 104° F)
Ambient operating humidity: 10 to 90% noncondensing
Certifications: CE, FCC, IC

Switching Features
Layer 2 features: 
- IGMP snooping
- STP / RSTP with priorities and port-level disable
- Port isolation
- Storm control
- Voice VLAN
- Port mirroring
- LACP port aggregation
- Multicast / broadcast rate limiting
- MAC address blocking
- Flow control
- 802.1X control
- Jumbo frames
- Proprietary loop protection
- DHCP snooping / guarding
- Egress rate limit
- LLDP-MED
- Port restricted by MAC
- Device isolation with ACLs
Layer 3 features: 
- DHCP for locally-managed networks
- DHCP relay
- Inter-VLAN routing between networks on same switch
- Static routing between local networks
- Network isolation with ACLs

Etherlighting™
Ethernet: 
- Locating
- Speed/link
- Native VLAN/network
SFP+: 
- Locating
- Speed/link
- Native VLAN/network

Application Requirements
UniFi Network: Version 8.1.127 and later