SWITCH 16P 10/100/1000M BASE-T CUDY GS1020PE 2P 1000 BASE-X SFP SLOT - POE+ 200W

Interfaces
Gigabit SFP Slots: 2
Gigabit RJ45 PoE Ports: 16
Max Power on a Single PoE Port: 30W
PoE Port Notes: The PoE ports comply with IEEE 802.3at/af standards.
Extend Mode Ports: #9~#16
VLAN Mode Ports: #1~#16
LED: 
- Power
- PoE Status of Each PoE Port
- Link/ACT of Each Ethernet Port
- PoE Max Status
- DIP Mode (SW)
Power Input: AC Inlet
Physical Buttons: 
- Extend On/Off
- VLAN On/Off
- PoE Watchdog On/Off
Physical Buttons Note: The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.

Performance
Copper Speed and Distance: 
- Cat. 3 or higher cable: 100 meters at 10 Mbps
- Cat. 5 or higher cable: 100 meters at 100 Mbps
- Cat. 5e or higher cable: 100 meters at Gigabit
- Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note: 250-meter transmission is only available on the Extend Mode ports.
Optical Spec and Distance: Depends on the Installed Optical Module
MAC Address Table: 8192
Max Switching Capacity: 36 Gbps
Jumbo Frame: 15 KB
Packet Buffer: 4 Mbit

Power
Power Methods: AC
AC: 100-240V 50/60Hz
Power Supply: 200W
Max Power Excluding PoE: 14W

Switching
802.3 Protocols: 
- 802.3i 10BASE-T
- 802.3u 100BASE-TX
- 802.3ab 1000BASE-T
- 802.3z 1000BASE-X
- 802.3x Flow Control
- 802.3af PoE
- 802.3at PoE
L2 Features: 
- Loop Prevention
- Loop Detection
- DSCP QoS
- 802.1p QoS

Reliability
Grounding Methods: Three-Prong Plug
ESD: 
- Contact: 6kV
- Air: 8kV
Lightning/Surge Protection: 
- RJ45: CM 6kV
- Power: DM 2kV, CM 4kV
Environment: 
- Operating Temperature: 0~40 ℃ (32~104 ℉)
- Storage Temperature: -40~70℃ (-40~158 ℉)
- Operating Humidity: 10~90% non-condensing
- Storage Humidity: 10~95% non-condensing

Mechanical
Dimension: 440×220×44 mm
Casing Material: Metal
Installation: 
- Desktop
- Rackmount via Brackets

Package Content
GS1020PS2
Power Cord
Mounting Kit
Installation Guide